Novowood is a composite material (WPC), 70% made of wood natural fibers and 30% made of Polyethylene. It can be used for products of different shapes and colors, still maintaining the elegance of wood and the advantages of a not completely natural material.
Ipercoop Formigine (MO)
Inaugurated the new Ipercoop commercial centre, which was realized with 12 million euro of investment and with an area of more than 4,000 square meters. The inauguration ceremony was attended by Mayor Maria Costi, Managing Director of Coop Alliance 3.0 Massimo Ferrari. The building has been designed and manufactured with techniques that minimize environmental impact and guarantee lower energy consumption than those of a "traditional" store. Novowood took part in the project for c…Read more
Inaugurated the new Ipercoop commercial centre, which was realized with 12 million euro of investment and with an area of more than 4,000 square meters. The inauguration ceremony was attended by Mayor Maria Costi, Managing Director of Coop Alliance 3.0 Massimo Ferrari. The building has been designed and manufactured with techniques that minimize environmental impact and guarantee lower energy consumption than those of a "traditional" store. Novowood took part in the project for coatings in the main entrance. According to the client, paneling in Wood Plastic Composite (WPC) with aluminium joists were designed and assembled at the workshop and subsequently installed on the frame on the construction site. For the aesthetic achievement required, 120x60 premium finishing louvres were used, assembled with painted aluminum substructures.Read less
You may also be interested in
Roadhouse Restaurant - Bologna (BO)
“Roadhouse Restaurant” is the first steakhouse c…
Yacht Club Laredo (Spain)
3200 square meters of floor floating docks in the new Harbou…
Kindergarten in Bolzano
Located on the first floor of a new school area in Bolzano, …
Giardini d'Inverno Milano
Innovation, comfort and energy efficiency: these are the hal…
Marina d'Arechi (Salerno)
Novowood is proud to have participated in the realization of…
In this prestigious Lombardy project, the infinity 60 colo…
Business Centre - Piacenza
The executive center " FARNESIANA BUSINESS PARK " …
Europa Hotel Lignano
8th floor of the Europa Hotel in Lignano Sabbiadoro …
Beach Resort Venice
The resort of the famous Swiss chain Hapimag is located in t…
Frequently asked questions
Novowood can be used for the flooring of terraces, swimming-pools, verandas, patio gardens, gazebos, exterior designs, and much more. In seaside environments, it can be efficiently used for walkway surfaces, wall cladding, louvers, wharfs, handrails or panel sections, but also for cladding and sunscreen profile.
Novowood has all the qualities of wood, but not its defects: it is long-lasting, stable and it does not warp, it has no splinters and does not lose color, it is sun, ice and rain resistant.
Novowood’s polymeric component allows it to better resist the deterioration due to the sea climate and salty water. Furthermore, it works as a protective layer against the proliferation of fungus and mould.
Finally, the composite materials require no maintenance, painting and are 100% recyclable.
Yes, it is more expensive than softwood, although the treaty, but it has a very similar price to the fine exotic wood (teak or similar), or the kind of wood that can be used outside for decades without any deterioration.
Novowood does not require any special maintenance, it is easy to clean thanks to the well-thought combination of wood and polyethylene, that restrain the growth of mould and fungus. It is suggested to clean it by using neutral floor detergents, and if using a high-pressure cleaner, it is necessary to keep the machine at least 30 cm away from the walking surface.
Novowood does not lose color thanks to the pigments and UV absorbers contained in the polymeric composite.
Novowood resists the UV rays damage thanks to a special composition of pigments and UV absorbers.
Wood plastic composite Novowood has excellent resistance to fire, responds to the class of fire resistance Cfl-S1 determined in MD March 15, 2005 (OJ No. 73 of 30/03/2005): Requirements for fire resistance of construction products installed in activities governed by specific technical fire prevention according to the European classification system