Novowood is a composite material (WPC), 70% made of wood natural fibers and 30% made of Polyethylene. It can be used for products of different shapes and colors, still maintaining the elegance of wood and the advantages of a not completely natural material.
Cogeneration plant covered with sunshades
Novowood is very pleased to have contributed with its Infinty 90 technical wood composite sunshades to the cladding of the facade of the composting and biomethane production plant in Sant'Agata Bolognese. The biomethane plant in Sant'Agata Bolognese is a very ambitious project of the Hera Group that allows the recovery of materials and energy from organic waste thanks to the production of compost and biomethane derived from the treatment of municipal organic waste from separate waste …Read more
Novowood is very pleased to have contributed with its Infinty 90 technical wood composite sunshades to the cladding of the facade of the composting and biomethane production plant in Sant'Agata Bolognese. The biomethane plant in Sant'Agata Bolognese is a very ambitious project of the Hera Group that allows the recovery of materials and energy from organic waste thanks to the production of compost and biomethane derived from the treatment of municipal organic waste from separate waste collection. The process avoids the consumption of over 6,000 tonnes of oil per year as fossil fuel and saves 14,000 tonnes of CO2. The Novowood WPC profiles were installed with the Surface system, which allows for the quick application of individual elements. Find out more about Surface on the dedicated pageRead less
You may also be interested in
Bologna - Via Due Madonne 8, Savena district
The district develops on the outskirts of Bologna, along the…
Cladding walls and column
Novowood plastic composite wood has been chosen again as the…
In an unusual copper brown color for the clothing brand faca…
In this prestigious Lombardy project, the infinity 60 colo…
Ponte della Pace, Casalecchio di Reno (BO)
May 2021 – Casalecchio di Reno (BO), the “Ponte …
Private pool Decking
The Santa Venerina project is entirely developed for a priva…
Were used about 4 kilometers shading profile 60x40 to reflec…
Shopping Center Coop Modena Italy
A new face for the shopping center Coop located in Via …
West Bay Lagoon – Doha
Katara Beach Club is located within the tourist village o…
Frequently asked questions
Novowood can be used for the flooring of terraces, swimming-pools, verandas, patio gardens, gazebos, exterior designs, and much more. In seaside environments, it can be efficiently used for walkway surfaces, wall cladding, louvers, wharfs, handrails or panel sections, but also for cladding and sunscreen profile.
Novowood has all the qualities of wood, but not its defects: it is long-lasting, stable and it does not warp, it has no splinters and does not lose color, it is sun, ice and rain resistant.
Novowood’s polymeric component allows it to better resist the deterioration due to the sea climate and salty water. Furthermore, it works as a protective layer against the proliferation of fungus and mould.
Finally, the composite materials require no maintenance, painting and are 100% recyclable.
Yes, it is more expensive than softwood, although the treaty, but it has a very similar price to the fine exotic wood (teak or similar), or the kind of wood that can be used outside for decades without any deterioration.
Novowood does not require any special maintenance, it is easy to clean thanks to the well-thought combination of wood and polyethylene, that restrain the growth of mould and fungus. It is suggested to clean it by using neutral floor detergents, and if using a high-pressure cleaner, it is necessary to keep the machine at least 30 cm away from the walking surface.
Novowood does not lose color thanks to the pigments and UV absorbers contained in the polymeric composite.
Novowood resists the UV rays damage thanks to a special composition of pigments and UV absorbers.
Wood plastic composite Novowood has excellent resistance to fire, responds to the class of fire resistance Cfl-S1 determined in MD March 15, 2005 (OJ No. 73 of 30/03/2005): Requirements for fire resistance of construction products installed in activities governed by specific technical fire prevention according to the European classification system