Novowood is a composite material (WPC), 70% made of wood natural fibers and 30% made of Polyethylene. It can be used for products of different shapes and colors, still maintaining the elegance of wood and the advantages of a not completely natural material.
Marina d'Arechi (Salerno)
Novowood is proud to have participated in the realization of this massive project.
The marina is separated from the coast by a channel about 70 meters wide and it is connected to ground via vehicular and pedestrian bridges.
With its 1000 berths from 10 to over 80 meters, it is one of the largest marina in the Mediterranean.
Products used in this project
You may also be interested in
Cycle pedestrian walkway
This bridge is the result of a careful planning study in the…
Adria (Italia)
International Fund for Agricultural Development - Rome (RM)
The International Fund for Agricultural Development (IFAD) i…
Roma (Italia)
Lido
The resistance to the marine environment and the absence of …
Cesenatico (Italia)
Cladding walls and column
Novowood plastic composite wood has been chosen again as the…
Ferrara (Italia)
Isla Bonita Salerno
With the arrival of the great heat, we bring you into a real…
pontecagnano (Italia)
Sunscreen WPC
Covering Stairwell project completed on a building in Saronn…
Saronno (Italia)
Decathlon Genova
In an unusual copper brown color for the clothing brand faca…
genova (Italia)
Private House - Milano
The multiple uses that Novowood composite wood can have make…
Cuggiono (Italia)
Shopping Center Coop Modena Italy
A new face for the shopping center Coop located in Via …
modena (Italia)
Frequently asked questions
Novowood can be used for the flooring of terraces, swimming-pools, verandas, patio gardens, gazebos, exterior designs, and much more. In seaside environments, it can be efficiently used for walkway surfaces, wall cladding, louvers, wharfs, handrails or panel sections, but also for cladding and sunscreen profile.
Novowood has all the qualities of wood, but not its defects: it is long-lasting, stable and it does not warp, it has no splinters and does not lose color, it is sun, ice and rain resistant.
Novowood’s polymeric component allows it to better resist the deterioration due to the sea climate and salty water. Furthermore, it works as a protective layer against the proliferation of fungus and mould.
Finally, the composite materials require no maintenance, painting and are 100% recyclable.
Yes, it is more expensive than softwood, although the treaty, but it has a very similar price to the fine exotic wood (teak or similar), or the kind of wood that can be used outside for decades without any deterioration.
Novowood does not require any special maintenance, it is easy to clean thanks to the well-thought combination of wood and polyethylene, that restrain the growth of mould and fungus. It is suggested to clean it by using neutral floor detergents, and if using a high-pressure cleaner, it is necessary to keep the machine at least 30 cm away from the walking surface.
Novowood does not lose color thanks to the pigments and UV absorbers contained in the polymeric composite.
Is possible only a slight variation of tone certifiable in about a 7-10% due to the presence for 2/3 of the natural material as the wood flour, containing an internal "tannin" that is gradually released.
Novowood resists the UV rays damage thanks to a special composition of pigments and UV absorbers.
Wood plastic composite Novowood has excellent resistance to fire, responds to the class of fire resistance Cfl-S1 determined in MD March 15, 2005 (OJ No. 73 of 30/03/2005): Requirements for fire resistance of construction products installed in activities governed by specific technical fire prevention according to the European classification system
